| |
| Present position >>Home >>Products
>>Network and Data>>OPV6000 |
| |
|
| ¡ùSpecifications ¡¡¡¡OPV6000
products are converters of 10/100BaseTX (2 channels)
/ E1/T1 (4 channels) and fiber optic data transmission.
These products convert the normative 10/100Mbps
signals and standard PBX, E1/T1 signals that are
transmitted over the copper cable into the data
signals suitable for long-distance fiber optic
transmission. OPV6000 products possess two Ethernet
ports and four communication network ports. Each
of these Ports are independent of another and
can all be applicable to 10/100 Mbps Ethernet
and E1/T1 data. Every net port can be used synchronously
and support both half- and full-duplex data at
the corresponding port including the optic fiber.
Either a single fiber/double fiber or WDM technology
can be employed to realize different transmission
purposes. The transmission distance of a multimode
fiber is 2000M and that of a single mode fiber
is up to 30000M.
¡¡¡¡OPV6000 products can be operated together with
OPV2000 or OPV4000 products, and at the same time
transport video, audio and data signals. On the
front panel of the products are set Ethernet or
E1 connector (RJ45), fiber optic connector (ST/FC)
and LED indicator lights, through which users
can easily monitor the status of power supply,
connection and channels.
¡¡¡¡Two types of OPV6000 products are available:
standalone and card-cage packaging.
|
|
Type of the products |
The
products describing |
| OPV6000T/R-M |
10MBase-FX |
| OPV6000T/R-S |
10MBase-FX |
| OPV6000T/R-M |
10/100MBase-FX |
| OPV6000T/R-S |
10/100MBase-FX |
| OPV6000T/R-M |
1000MBase-FX |
| OPV6000T/R-S |
1000MBase-FX |
| OPV6000-E-T/R-M |
4 T1/E1 |
| OPV6000-E-T/R-S
|
4 T1/E1 |
|
|
¡ùApplications
 ¡¡
Broadcasting and TV program transmission
¡¡
Military communications
¡¡
Long-distance Video conference
¡¡
Security surveillance and cable TV system
¡¡
Relay between studios to transmission center (STL)
¡¡
TV programming and Education system
¡¡
Field pickup
¡ùETHERNET FEATURES
¡¡
IEEE802.3 1998 compatible with the coming TIA/EIA-785
¡¡
Auto MDI and MDI-X diagnosis
¡¡
16-port central address memory, high-speed SRAM,
and 1k bytes packet buffer
¡¡
Data rate 10/100Mbps and Broadcast storm control
E1/TI FEATURES
¡¡
Fiber optic relay of digital encoded signals
¡¡
Duplex data transmission rate£º2.048Mbps/1.544Mbps
Optical FEATURES
¡¡
Single mode or multimode fiber
¡¡
One-fiber solution adapts to WDM
¡¡
Transmission distance up to 60Km
¡ùSystem Flowchart |
| |
| |
¡ùFoundational
parameters
|
Parameter
|
Typical
value
|
Unit
|
Remark
|
|
Ethernet |
Channel capacity
|
2 |
Channel |
|
Signal protocol
|
IEEE802.3 £¬ IEEE802.3u £¬
IEEE802.3x |
|
|
Rate |
10/100M with auto-negotiation
|
Bit/s |
|
Operation
mode |
Half-duplex/ full-duplex
with a uto-negotiation |
|
|
Diagnosis
|
Auto MDI and MDI-X diagnosis
|
KHz |
|
|
E1/T1 |
Rate |
2.048 or 1.544 ¡À 50ppm |
M bit/s |
|
Code type
|
HDB3 |
|
|
Connector
|
ITU-T G.703 and G.704 |
|
|
I/O Impedance
|
120 |
Ohm |
|
Quantity |
1-4 |
|
|
Jitter |
G.742 and G.823 |
|
|
|
Electrical |
Power level
|
+5 |
VDC |
|
Power |
10 |
Watt |
|
|
Optical |
Wavelength
|
1310/1550 |
nm |
|
Transmitting
power |
+2/+3 |
dBm |
9/125 ¦Ìm optic fiber |
Spectrum bandwidth
|
3 |
nm |
|
Receiving
power £¨ minimum £© |
-23 |
dBm |
|
Receiving
power £¨ maximum £© |
-1 |
dBm |
|
Bit rate £¨
directional £© |
1.5 |
Gbps |
|
|
Connector |
Ethernet/E1
|
RJ45 |
|
|
Fiber optic
|
FC/ST |
|
SC option |
|
Physical |
Operating
temperature |
-20~+70 |
¡æ |
|
Storing temperature
|
-30~+80 |
¡æ |
|
Humidity |
0~90 |
% |
|
Induction
|
EN50130-5 |
1995 |
|
Damp Heat
|
BS2011 P2.1 |
|
|
|
Electromagnetic Compatibility |
Radiation
|
EN50081-1, EN55022-B, CE,
FCC |
|
|
Magnetic susceptibility
|
EN50130-4, EN50082-1 |
|
|
|
Product Information |
OPV6000TX
|
RGB video transmitter |
|
|
OPV6000RX
|
RGB video receiver |
|
|
|
| |
| |
|
|
|
|
